Electrical Safety Testers, Sefelec

sefelec

Leader in the field of safety tester and cable tester ...

THE SAFETY TESTER IS THE GENERIC TERM TO COVER THE 3 OR 4 TESTS
OF THE ELECTRICAL SAFETY STandARDS, FROM THE INTERNATIONAL STandARDS

ground bond test (also called bonding test, ground continuity test)

insulation test (also called high resistance test, megger test)

hipot test to make a high voltage test (also called dielectric strength test,
hipot test, hi-pot test, breakdown test or flash test)

leakage current measurement (also called line leakage test)

The final purpose of those tests is to validate that the product under test is safe for the end user, and complies with the quality requirements from the Low Voltage Directive (LVD), applicable to the corresponding standards (IEC335, IEC950, IEC601, IEC1010, IEC598, IEC990, IEC204...)

Safety Tester Selector Guide		Ground continuity/ Ground bond test	Dielectric strength/ Hipot test	Insulation/High resistance test	Leakage current/Line leakage test	Power measurement P,U,I, cosφ	Interface	Software
	Safety tester SXS50 New	5-30A AC 40A option 1mΩ-1,5Ω	0-5 kV AC 10mA	50 kΩ-200 GΩ/ 500V DC 2 TΩ option 1000V DC option	FXS501	FXS501	RS232 included, GPIB, PLC, Ethernet in option	SXS Pro
	Safety tester SXS56 New	5-30A AC 40A option 1mΩ-1,5Ω	0-5 kVAC 10mA 0-6 kVDC 4mA	50 kΩ-200 GΩ/ 500V DC 2 TΩ option 1000V DC option	FXS501	FXS501	RS232 included, GPIB, PLC, Ethernet in option	SXS Pro
	Safety tester SXS500 New	5-30A AC 40A option 1mΩ-1,5Ω	0-5 kV AC 110mA	50 kΩ-200 GΩ/ 500V DC 2 TΩ option 1000V DC option	FXS501	FXS501	RS232 included, GPIB, PLC, Ethernet in option	SXS Pro
	Safety tester SXS506 New	5-30A AC 40A option 1mΩ-1,5Ω	0-5 kVAC 110mA 0-6 kVDC 40mA	50 kΩ-200 GΩ/ 500V DC 2 TΩ option 1000V DC option	FXS501	FXS501	RS232 included, GPIB, PLC, Ethernet in option	SXS Pro
	Safety tester 2745A	3-40A DC up to 600mΩ	0-5 kV AC 40mA 0-6 kV DC 10mA	0-10 GΩ 50/100/500/ 1000V DC	-	-	RS232 in option	No
	Safety tester PST500	100 mA, 200 mA, 10A, 25A, 12V AC	0-5 kV AC 500VA	0-1 GΩ	EN60335-1 EN60950 EN598-1 EN61010	Until 16A single phase	RS232	No
	Line Leakage Tester FMG500 (Master)	-	-	-	IEC335, iEC950, IEC598, IEC601, IEC1010, IEC990	Up to 63 A single phase or three phases	RS232 included, GPIB, PLC in option	SMG Pro
	Line Leakage Tester FXS501 (Slave)	XS Series	XS Series	XS Series	IEC335, IEC950, IEC598, IEC601, IEC1010, IEC990	Up to 63 A single phase or three phases	RS232 included, GPIB, PLC, Ethernet in option	SXS Pro

Electrical Safety Tester SXS50

Reference: SXS50

Product description: Designed as well for laboratories as for production lines, the XS Series is our new Electrical Safety Tester generation.

Cheaper, faster, better, based on new technologies, the XS Series can offer advanced features such as optimized accessory management, Ethernet interface, faster test times, and industrial interfaces.

Product details:
• 4 in 1 tester
• Ground bond test up to 30 A AC / resitance up to 1.5 Ω
• Hipot up to 5 kV AC 10 mA nominal current / 13 mA short circuit current

• Insulation measurement up to 1000 V / resistance from up to 2 TΩ
• Leakage current measurement made with FXS501 rack
• fully automatic testing
• standard RS232, optional IEEE488-2, Ethernet, or PLC
• SXSPRO multi-lingual software
• easy to use and user friendly interface

Electrical Safety Tester SXS56

Reference: SXS56

Product description: Designed as well for laboratories as for production lines, the XS Series is our new Electrical Safety Tester generation.

Cheaper, faster, better, based on new technologies, the XS Series can offer advanced features such as optimized accessory management, Ethernet interface, faster test times, and industrial interfaces.

Product details:
• 5 in 1 tester
• Ground bond test up to 30 A AC / resitance up to 1.5 Ω
• Hipot up to 5 kV AC 10 mA nominal current / 13 mA short circuit current

• Hipot up to 6 kV DC 4 mA nominal current / 9 mA short circuit current
• Insulation measurement up to 1000 V / resistance from up to 2 TΩ
• Leakage current measurement made with FXS501 rack
• fully automatic testing
• standard RS232, optional IEEE488-2, Ethernet, or PLC
• SXSPRO multi-lingual software
• easy to use and user friendly interface

Electrical Safety Tester SXS500

Reference: SXS500

Product description: Designed as well for laboratories as for production lines, the XS Series is our new Electrical Safety Tester generation.

Cheaper, faster, better, based on new technologies, the XS Series can offer advanced features such as optimized accessory management, Ethernet interface, faster test times, and industrial interfaces.

Product details:
• 2 in 1 tester
• Hipot up to 5 kV AC 110 mA nominal current / 200 mA short circuit current
• Insulation measurement up to 1000 V / resistance from up to 2 TΩ

• fully automatic testing
• standard RS232, optional IEEE488-2, Ethernet, or PLC
• SXSPRO multi-lingual software
• easy to use and user friendly interface

Electrical Safety Tester SXS506

Reference: SXS506

Product description: Designed as well for laboratories as for production lines, the XS Series is our new Electrical Safety Tester generation.

Cheaper, faster, better, based on new technologies, the XS Series can offer advanced features such as optimized accessory management, Ethernet interface, faster test times, and industrial interfaces.

Product details:
• 5 in 1 tester
• Ground bond test up to 30 A AC / resitance up to 1.5 Ω
• Hipot up to 5 kV AC 110 mA nominal current / 200 mA short circuit current
• Hipot up to 6 kV DC 10 mA nominal current / 13 mA short circuit current

• Insulation measurement up to 1000 V / resistance from up to 2 TΩ
• Leakage current measurement made with FXS501 rack
• fully automatic testing
• standard RS232, optional IEEE488-2, Ethernet, or PLC
• SXSPRO multi-lingual software
• easy to use and user friendly interface

Electrical Safety Tester 2745A

Reference: 2745A

Product description: Dedicated for production line or other environments, Premier series is synonymous of low cost but high benefits

Product details:
• AAC/DC dielectric strength test (also called hipot test, dielectric strength test), insulation measurement (megohmmeter mode), ground continuity (also called ground bond testing)
• RS232 interface (option)
• “one button check-up” for easy test
• PLC control for start/stop and test result output
• dedicated for production lines
• easy to use interface
• omplies with the following safety testing standards: EN61010-1, EN60065, EN60335-1, EN60598-1, EN60601-1, EN60950, CEI990, and many others

Electrical Safety Tester PST500

Reference: PST500

Product description: Dedicated for on site control, the portability of the PST500 safety tester is a real advantage

Product details:
• AC dielectric strength test (also called hipot test, dielectric strength test), insulation measurement (megohmmeter mode), ground continuity (also called ground bond testing), leakage current measurement, power measurement, cosφ
• “one button check-up” for easy test
• RS232 multi-lingual software (in option)
• dedicated for on field testing
• easy to use interface
• complies with the following safety testing standards : EN61010-1, EN60065, EN60335-1, EN60598-1, EN60601-1, EN60950, CEI990, and many others

Electrical Safety Tester FMG500

Reference: FMG500

Product description: In order to comply with any laboratory or production application, FMG series is constantly following the international standard evolutions

Product details:
• leakage current measurement, single and three phases power measurement, Cos φ, functional test
• “one button check-up” for easy test
• RS232 or IEEE488-2 multi-lingual software
• easy to use and user friendly interface
• dedicated for laboratory and production lines
• complies with the following safety testing standards : EN61010-1, EN60065, EN60335-1, EN60598-1, EN60601-1, EN60950, CEI990, and many others

Electrical Safety Tester FXS501

Reference: FXS501

Product description: In order to comply with any Laboratory or production application, our FXS line leakage tester is constantly following the international standard evolutions, and is one of the 4 tests required by the Electrical Safety standards

Product details:
• leakage current measurement, single and three phases power measurement, Cos φ, functional test
• “one button check-up” for easy test
• RS232, IEEE488-2, Ethernet interfaces
• multi-lingual software
• easy to use and user friendly interface
• dedicated for laboratory and production lines
• complies with the following safety testing standards : EN61010-1, EN60065, EN60335-1, EN60598-1, EN60601-1, EN60950, CEI990, and many others

Alphatek, ASL, Calibration, Clare, Cropico, Data Acquistion, Decade Boxes, Digital Thermometers, Dry Blocks / Furnaces, Electrical Safety Tester, GMC,
Hipot / Dielectric Strength Testers, Insco, Insulation Testers, Isotech, Liquid Baths, Measurement, Megohmmeters, Microhmmeters, Micro Movements,
Milliohmmeters, Power Quality, Resistance Standards, Seaward, Sefelec, T/C Calibrators / Simulators, Techne, Temperature Standards, Weights and Balances,
Connecticut, Maine, ME, Massachusetts, MA, New England, New Hampshire, NH, Rhode Island, RI, Vermont, VT, United States, U.S., USA